PUMP FINDER
Related Information
​
​
​
What else can I do?
​
​
​
Email this to a friend
Hover here for more
Step 1 and Step 2 - Select fields to narrow down your search.
​
Subsequently, under the Recommended Pump Type, click on the displayed pump model and scroll below to view pump details. You may select 2 or more pump types to compare details.
​
Step 3 - Finally, you may click on Pump Sizing to input your required pump performance parameters, which will display the selected best efficiency pump models that will meet your performance requirements.
​
Each pump model displayed has an icon at the right end, that when clicked will enable a download (or right-click to display a new tab) of the Pump Data Sheet showing the model’s pump performance curve and other specific information. The is to view pump performance curve and icon is to send enquiry to our customer service for the specific pump model selected.
Alternatively, if you would like to view our full list of products, please visit our product information section that also display parts list, catalogs, general dimensions, etc.
Step 1:
Industry
Chemical/Liquid Processing
Chemical/Liquid Processing
Edible Oils - Refinery, Oleo Chemical, Bulking Plant
Edible Oils - Refinery, Oleo Chemical, Bulking Plant
General Industries
General Industries
Palm Oil Mills
Palm Oil Mills
Pulp & Papers
Pulp & Papers
Sugar Mills
Sugar Mills
Step 2 :
Pump Application
Chemicals
Chemicals
Drainage
Drainage
Effluent / Sludge
Effluent / Sludge
Metering
Metering
Sewage
Sewage
Thermal Oil
Thermal Oil
Water / Clean Liquid
Water / Clean Liquid
Recommended
Pump Type
KS-SG2
KS-SR
KS-SE3
KS-TO
KDP
Step 3:
Pump Sizing
Pump Model Quick Sizing
To Advance Sizing Mode
m
m³/hr
Rated Capacity input field has invalid data : Value must be more than 0
Insufficient information. Please enter all required information.
System Head input field has invalid data : Value must be more than 0
No suitable pump model found. Please contact us for assistance.
Pump Type | Model | Speed (rpm) | Imp. Size (mm) | |
|---|---|---|---|---|
Pump Type | Model | Speed (rpm) | Imp. Size (mm) | Capacity (m³/hr) | Head (m) | NPSHR (m) | Power Absorbed (HP) | Pump Efficiency (%) | |
|---|---|---|---|---|---|---|---|---|---|
Generate Pump Data Sheet
Send
Enquiry
to us
View Pump
Performance Curve
KS-SG2
Chemical Process Pump
Design:
Horizontal, long-coupled, single-stage stainless steel centrifugal pump with centerline discharge volute casing, overhung impeller, replaceable shaft-protecting sleeve and end suction in back pull-out design. Available in 37 pump sizes with 4 different sizes of support.
​
Complies with ISO 2858:1975 (dimensions and performance), ISO 5199:2002 (design and construction), ISO 7005-1:1992–PN16 (flanges dimensions and drilling), DIN 24960 (mechanical seal dimensions) and ISO3661:1977 (baseplate dimensions).
​
Suitable for:
Liquids with low viscosity, clean or slightly contaminate, chemically inert or aggressive, and free from solid particles.
Fields of Application:
Chemical and petrochemical industry, automobile, mechanical and general engineering industries, food and beverage industry, pharmaceutical industry, paint industry, palm oil industry, plastic and rubber industry, iron and non-ferrous metal industry, paper and chemical wood pulp industries, textile industry, building and construction industry, thermo-electric power station, environmental and wastewater technology, refinery systems, heating and air conditioning, drainage, water supply, condensate transport, swimming pools, irrigation, fire-fighting water, oil, brine and others.
​
Technical Data:
​
​
​
​
​
​
​
​
​
​​
Discharge Size:
32 mm to 150 mm
Flow Rate:
up to 650 m³/hr
Head:
up to 150 m
Speed:
max. 3,600 rpm
Working Temperature:
max. 180 °C
Casing Pressure:
up to 16 bar
Shaft Seal:
Standard - Single Acting Mechanical Seal
Optional - Double Acting Mechanical Seal, Cartridge Mechanical Seal, Gland Packing
Wetted Parts Material:
Standard - Stainless Steel 316 (CF-8M)
Optional - Stainless Steel 304 (CF-8), Cast Iron, Alloy 20. CD4MCu
Advantages:
-
Large hydraulic field of applications
-
Standard radial, closed impeller for good efficiency
-
Easy and safe maintenance through the back pull-out design
-
Heavy duty design with long bearing life expectancy
-
Shaft not in contact with pumped liquid and is protected by shaft sleeve
-
Available with jacketed pump casing and stuffing box cover, closed or open type impeller, bearing frame with oversized oil bath cooling and different variations of sealing arrangements to meet all kind of applications
-
Shaft with greatest possible diameters, to achieved low shaft deflection by operational radial forces
​​
KS-SR
General Application Pump
Design:
Horizontal, long (SR models) and close-coupled (SRM models), single-stage stainless steel centrifugal pump with centerline discharge volute casing, overhung impeller and end suction in back pull-out design. Available in 37 pump sizes with 4 different sizes of support.
Complies with ISO 2858:1975 (dimensions and performance), ISO 7005-1:1992–PN16 (flanges dimensions and drilling) and ISO3661:1977 (baseplate dimensions).
​
Suitable for:
Liquids with low viscosity, clean or slightly contaminate and free from solid particles.
Fields of Application:
Automobile, mechanical and general engineering industries, food and beverage industry, pharmaceutical industry, paint industry, palm oil industry, plastic and rubber industry, iron and non-ferrous metal industry, paper and pulp industry, textile industry, building and construction industry, heating and air conditioning, drainage, water supply, condensate transport, swimming pools, irrigation, fire-fighting water, oil, brine and etc.
​
Technical Data:
​
​
Discharge Size:
32 mm to 200 mm
Flow Rate:
up to 700 m³/hr
Head:
up to 150 m
Speed:
max. 3,600 rpm
Working Temperature:
max. 120 °C
Casing Pressure:
up to 16 bar
Wetted Parts Material:
Standard - Stainless Steel 304 (CF-8)
Optional - Stainless Steel 316 (CF-8M), Cast Iron
Shaft Seal:
Standard - Single Acting Mechanical Seal
Optional - Gland Packing
Advantages:
-
Large hydraulic field of applications
-
Standard radial, closed impeller for good efficiency
-
Easy and safe maintenance through the back pull-out design
-
Available in close-coupled design (SRM) to minimize space required for installation
-
Robust and stiff solid stainless steel shaft to achieve low shaft deflection by operational radial forces
​
​
KS-SE3
Solid Handing Pump
Design:
Horizontal, long-coupled, single-stage stainless steel centrifugal pump with tangential discharge concentric casing, overhung impeller and end suction in back pull-out design. Available in 12 pump sizes with 2 different sizes of support.
Flange dimensions and drilling according to ISO 2084–PN16.
​
Suitable for:
Liquids containing suspended matter or solids of all sorts.
Fields of Application:
Sewage plants (storm water, pre-filtered sewage, industrial effluents), chemical plants (chemical effluents, brines and lies, milk of lime, crystal sludge, filter material, plastic suspensions), palm oil mills (effluents, sludge, crude palm oil, claybath system), rolling mills (scale-contaminated water from steel and copper rolling mills), foundries and iron and steel works (effluents and sludge from dust and arrester plants), construction industry (mixtures of water and cement and water from excavation ditches), paper and cellulose paper industry (chemical pulp and mechanical pulp, suspensions up to 6% absolutely dry), sugar mills (carbonation juice, concentrated juice, milk of lime), food industry (thick mash, fruit and potato slices) and etc.
​
Technical Data:
​
​
​
​
​
​
​
​
​
​​
Discharge Size:
40 mm to 100 mm
Flow Rate:
up to 400 m³/hr
Head:
up to 100 m
Speed:
max. 2,900 rpm
Working Temperature:
max. 120 °C
Casing Pressure:
up to 16 bar
Wetted Parts Material:
Standard - Stainless Steel CA15
Optional - Stainless Steel 304 (CF-8), Cast Iron
Shaft Seal:
Standard - Single Acting Mechanical Seal
Optional - Lip Sealing, Dynamic Sealing, Gland Packing
Advantages:
-
Only one type of bearing and power end, two types of shaft and seal for all sizes of pump, thus reduces parts inventories, saves capital and storage space
-
Concentric casing with tangential discharge, reduce turbulence and cavitation, significant extended casing life especially in abrasive service
-
Self-priming pump models are available under this series of pumps which are able to operate without requiring the piping being primed with liquid.. These employ just a different pump casing attached to the same back-end of the KS-SE3 models
-
Standard non-clogging semi-open impeller, ideal for handling liquids containing suspended matter or solids
-
Large impeller diameter design to achieve high head with low running speed, thus reduces parts wear and tear rate
-
Clearance adjusting screws make open impeller running clearance adjustment easy and accurate to extend pump performance life
-
Design with dynamic sealing for tough pumping services like paper stock and slurries, where external seal water is not required
-
Easy and safe maintenance through the back pull-out design
​
​
KS-TO
Thermal Oil Pump
Design:
Horizontal, long coupled, single-stage centrifugal pump with centerline discharge volute casing, overhung impeller and end suction in back pull-out design. Available in 19 pump sizes with 3 different sizes of support.
Complies with ISO 2858:1975 (dimensions and performance), ISO 7005-1:1992–PN16 (flanges dimensions and drilling) and ISO3661:1977 (baseplate dimensions).
​
Suitable for:
Mineral and synthetic heat transfer oils with high temperature, weak corrosive and free from solid particles.
Fields of Application:
Chemical industry (heating of agitators, reactors, drying plants, polymerisation plants, plants for conveying high-viscous products and producing plastic materials and synthetic fibres), rubber and plastic industry (heating of calendars, melting pots, power presses for plastics, automatic injection moulding machines, production of PVC adhesive tape), food industry (heating of baking and fish-frying ovens, distillation of fatty acids and glycerine, fat softening plants, production of potato chips and milk powder), paper industry and laundries (calendar rolls, production of corrugated cardboard, heating of washing machines, mangles and dryers), wood industry, asphalt/tar industry, soap/detergents industry, community heating, hydrocarbons preparation and etc.
​
Technical Data:
​
​
​
​
​
​
​
​
​
​
​
Discharge Size:
32 mm to 125 mm
Flow Rate:
up to 600 m³/hr
Head:
up to 100 m
Speed:
max. 2,900 rpm
Working Temperature:
max. 350 °C
Casing Pressure:
up to 16 bar
Wetted Parts Material:
Ductile Iron (Casing and Stuffing Box Cover), Cast Iron (Impeller), Stainless Steel 304 (CF-8) (Shaft)
Shaft Seal:
Single Acting Mechanical Seal
Advantages:
-
Large hydraulic field of applications
-
Radial, closed impeller for good efficiency
-
Easy and safe maintenance through the back pull-out design
-
Cooling of shaft sealing is not required
-
Combination of carbon sleeve bearing and anti-friction ball bearing gives noiseless operation and long service life
KDP
Dosing Pump
Design:
Simplex or duplex, positive displacement, reciprocating piston pump with adjustable flow.
​
Suitable for:
Low to highly viscous, chemically inert or aggressive liquids.
Fields of Application:
Sewage and environmental engineering, chemical and petrochemical industries, food and beverages industry, paper and pulp industry, palm oil industry, soap and fats industry, dye and paint industry, plastic and ceramics industry and etc.
​
Technical Data:
​
​
​
​
​
​
​
​
​
​
​
Connections:
½” BSP
Shaft Seal:
V-packing Set
Wetted Parts Material:
Stainless Steel 304 (CF-8)
Maximum Capacity:
Simplex - 30 L/hr
Duplex - 60 L/hr
Maximum Pressure:
35 kg/cm2
Maximum Suction Lift:
3 m for Water
Working Temperature:
max. 100 °C
Advantages:
-
Available in simplex, or duplex for multi chemical feed
-
Output adjustable from zero to maximum capacity
-
Completely self priming
-
Double ball valve action for ease of priming
-
Eccentric assembly has lifetime lubricated components
​
​